1991 Jeep Wrangler

Complete Pictures (including undercarriage) and Video at www.4-wheelclassics.com This 1991 Jeep Wrangler YJ is a beautiful Jeep that recently (completed last year) underwent a full frame-off restoration. Nearly every nut and bolt was and every item was new, rebuilt, or refurbished. This Jeep stands tall in person or in pictures and it was done right. The body is super clean and straight. This was an Arizona Jeep, so all of the metal was clean and it is an all metal Jeep. It was totally stripped down and professionally painted Electric Green and the paint looks awesome. When the body was removed from the frame for paint the underside was bed-lined and the frame was blasted and painted. The underside looks amazing and it was done to last a long, long time. It had all new lights installed, new seals, new body mounts, and they added extended fender flares. It has a new bestop soft top as well. The interior was also restored. The seats were completely redone in leather with Ostrich inserts. The inside floor was also bed-lined. They added a locking center console and redid the dash with new dash pad. New Steering wheel. Everything was dis-assembled and cleaned. It does have a factory roll bar too. The headlights, taillights, brakelights, and turn signals are all working. The gauges all work. The horn, windshield wipers, and heat are also working. It also has an aftermarket stereo. This Jeep runs and drives as good as it looks and mechanically is excellent. The engine was replaced with a 4.0L from a 1997 and it has around 70,000 miles on it currently. It was tore down, gone through, and resealed before it was installed. So it has new gaskets, new hoses, new belts, complete tune-up, new waterpump, new thermostat, new sensors, new engine mounts, new alternator, new power steering pump, and new custom exhaust. They also added a cold air intake. The transmission is the AXIS 5 speed manual that shifts great. There was a new clutch, pressure plate, throwout bearing, and slave cylinder installed when the engine was put in. It is mated to the np231 transfer case and the 4WD works like it should. The rear axle is a Dana 35 that has new seals and 3.73 gears. The front axle is a Dana 30 High Pinion with new seals and 3.73 gears. The brake system was totally redone with new Booster, new master cylinder, new lines and hoses, new front rotors, calipers , and pads. The rear has new drums, cylinders, shoes. The lift is a 4 Inch all spring with new shocks and new poly bushings. This is all sitting on Mickey Thompson Aluminum Wheels with new General Grabber ATX 33 Inch tires. This is an excellent build that cant be done for the prce we are asking for this vehicle. We drive what we sell so that we can give you a first hand and accurate report on how the vehicle runs and drives. Our pictures are never touched up or photoshopped. What you see is an accurate representation of the vehicle. We take consistent pictures and show you everything so you can get a true representation of the vehicle. Complete Pictures (including undercarriage) and Video at www.4-wheelclassics.com