1967 Chevrolet Camaro RS Coupe

This Camaro is unbelievable and cost over 130,000 to build.  It truly shows and runs with the best of them.  The Camaro has a 396 cubic inch Stroker Engine was built by Jim Barth.  He is known throughout the U. S. and Canada for his top performance engines that he builds for Corvette owners.  The engine has over 24,000 in it and at 580 hp on pump gas, it's amazing how streetable the car is.  

The entire car was stripped down to bare steel. it has new steel front end. doors. inner fender wells. and hood. The car has the original steel quarter panels. The car has also been cut and rubbed.   The car was originally a California car.  The car is salsa with silver stripes and is truly beautiful.

The Transmission is a Turbo 400 TCI Street fighter with Trans cooler and fan with a Hughes 3600 Pro Street Converter.

Other key points of the car:  B&M Shifter with lockout.   Aluminum Custom Drive Shift; Custom Built Ford 9” rear end; 3:70 Gear Ratio; Strange Case; Willwood disc branks on all 4 with line locks; Calvert Racing Springs. Caltrac Bars; Lakewood shocks; Global West Front Tubular Suspension.

Other Items:

Wheels - Magnums 2. 0 Front and Rear 2x11. 5x15et

Polished Magna Flow 3”

Mandrell Bent Streets Exhaust with xpipe in the middle of mufflers

Tail pipes were polished and look like chrome

The interior has new Rally Sport Door Panels. Console with Guages. Shift. Dash Pad. /p>

Full Roll Cage  – Certified in the 9s

New 5-point Simpson Harness Seat Belts on both driver and passenger seat

New Rubbers everywhere on car

Rally Sport Grille with Hide-Away Headlights and tail lights

Straightened and polished stainless front and rear (better than new)

Engine Specs:

Engine is internally balanced instead of externally balanced (all machine work done by Don Strausberg's Machine shop)

AFR 210 Comp Port Heads Part #1103. Flow 322 CFRM. Comp Ratio 11. 2. Bore 4. 030. stroke 3. 875 (Balanced and Blue Printed)

Fast XFI Sequential Port Fuel Injection System

Fast Sequential Port Distributor

1200 CFM Throttle body 44lb injectors (HPC coated silver outside)

Callies Crank 4340 forged

Crower Stroker Rods forged

SRP Forged Pistons (HPC coated on tops with Teflon coated skirts)

Crane Cam 234/242 Hydraulic Roller

Crane Roller Lifters

4130 Chrome Molly Push Rods

Cloyes Double Roller Timing Chain

Crane 1. 6 Ration Billet Roller Rockers

ATI Super Damper

Ken Xtream Air Filter

Meziere Electric Water Pump

Aeromotive Fuel Pump and tilter

Aluminum Radiator with twin electric fans and shroud

Ported and polished Victor Single Plane Manifold

Douges Headers