Tap Here to Email Seller Swipe left to dismiss
 

1966 Ford Mustang Fastback

Fastback Car for sale in Fallbrook, California 92009

$17,900

Advertisement
Advertisement
Classic Car Overview

Classic Car Overview

1966 Ford Mustang Fastback $17,900

Black · 8 Cylinder

1966 Mustang Fastback. I've owned this car for eighteen years and hand built the engine from a bare block. The body is straight and mostly rust free. There are some small rust spots in the trunk. Prior to owning the car a portion of the floor was replaced. There is minor damage to the left and right quarter panel caps. The driver side damage is limited to only needing a corner cap replacement. The passenger side quarter panel needs some more attention beyond the corner cap replacement. Driver side quarter panel has old body shop repair work (guessing in the 80's) that has not held up and will need attention. 

Drivetrain details:

.30 over 302 (306 C.I.)

11.1 compression

Full MSD 6AL ignition system with billet small cap distributor

Solid Comp cam (640 lift/310 duration)

Pro-Form billet body 750 double pumper 

AFR 205 CNC Ported heads

Harland Sharp Roller Rockers

Edelbrock Victor JR. intake ported to match the AFR's by ESI Racing in San Diego

Eagle forged crank

Eagle forged H beam rods

ALL ARP Fasteners 

ARP studded mains with windage tray, the heads are also studded 

Milodon 8QT oil pan and HV pump

Performance Automatic C-4 with full manual reverse valve body

4500 RPM stall convertor 

Ford 8" w/ 4:11 gears and a spool

Weld 15 X 3.5 wheels up front, 15X7 out back

This engine was built in 2007. Following it's build I made three passes with the car. The best being 11.20 @ 121MPH with a 1.6 60FT on 91 octane pump gas. This engine has never seen nitrous and has never overheated. I've driven the car about 500 miles since that build in 2007. I travel extensively for work and have had no time for the car. It has been garaged and driven on rare occasion. The car runs and drives fine though the drums brakes are inadequate for the power. Engine runs hard and clean. The hole in the hood is from a previous tunnel ram set up.

I've never dyno'd the car. My guess is at the crank the engine makes about 440 HP and 390 lbs ft torque. The car weighs 2700 lbs. without a driver.

I'm not interested in ANY trades of any kind. Do not contact me with ANY TRADE OFFERS. My asking price is $17,900 but I am flexible within reason.

Please email or text me and I will answer your questions the best I'm able. Thank you.

Scott

Email me: all_else_failed@yahoo.com 

Text me: 760-468-5765

1966 Ford Mustang Fastback Specifications

  • VIN

    N/A
  • Classic Car ID

    101030926
  • Stock Number

    N/A
  • Category

    American Classics
  • Condition

    Good condition
  • Trim Body Style

  • Bodystyle

    Fastback
  • Doors

    Two Door
  • Suspension

  • Suspension

    N/A
  • Engine

  • Engine

    8 Cylinder
  • Drivetrain

    N/A
  • Transmission

  • Transmission

    Automatic
  • Exterior

  • Exterior Color

    Black
  • Custom Exterior Color

    N/A
  • Interior

  • Interior Color

    N/A
  • Seat Color

    N/A

Classic Car Buyer and Seller Resources

Advertisement
Compare ({{vehicles.length}}/3)